Anchor Special PLOW
High Holding Power anchors allow a weight reduction of 25% compared to an ordinary anchor.
The only one made in Italy by qualified workers.
**10% shortened shank possible
**increasing of weight on the upper side by molten zinc possible up to +10%
RINA and ABS certificate
Available in hot dip galvanized execution, stainless stainless steel Duplex mirror polished, electro-polished and super passivated.
The Plow anchor’s anchoring power makes it a versatile anchor and very suitable for sandy and muddy seabeds. The traction tests, in the presence of shipping registers, allowed us to validate the anchoring capacity.
Certifications:
Technical sheet
| Weight Kg | A mm | B mm | C mm |
|---|---|---|---|
| 48 | 672 | 404 | 659 |
| 60 | 724 | 435 | 710 |
| 75 | 780 | 468 | 765 |
| 85 | 813 | 488 | 797 |
| 100 | 858 | 515 | 842 |
| 120 | 912 | 548 | 894 |
| 136 | 951 | 571 | 933 |
| 150 | 982 | 590 | 964 |
| 180 | 1044 | 627 | 1024 |
| 225 | 1124 | 675 | 1103 |
| 280 | 1209 | 727 | 1.186 |
| 360 | 1315 | 790 | 1.290 |
| 430 | 1395 | 838 | 1.369 |
| 495 | 1462 | 878 | 1.434 |
| 560 | 1.524 | 915 | 1.495 |
| 600 | 1.559 | 937 | 1.529 |
| 675 | 1.622 | 974 | 1.591 |
| 720 | 1.657 | 995 | 1.625 |
| 765 | 1.691 | 1.016 | 1.658 |
| 855 | 1.754 | 1.054 | 1.721 |
| 1.140 | 1.931 | 1.160 | 1.894 |
| 1.250 | 1.991 | 1.196 | 1.953 |
| 1.440 | 2.087 | 1.254 | 2.048 |
| 1.575 | 2.151 | 1.292 | 2.110 |
| 1.845 | 2.267 | 1.362 | 2.224 |
| 2.115 | 2.373 | 1.425 | 2.328 |
| 2.295 | 2.438 | 1.465 | 2.392 |
| 2.655 | 2.560 | 1.538 | 2.511 |
| 3.040 | 2.678 | 1.609 | 2.627 |
| 3.440 | 2.790 | 1.676 | 2.737 |
| 3.950 | 2.922 | 1.755 | 2.867 |
| 4.210 | 2.985 | 1.793 | 2.928 |
| 4.840 | 3.127 | 1.878 | 3.067 |
| 5.175 | 3.197 | 1.921 | 3.137 |
